EZ Trim Prosthetic Edge

• Comes in clear and black

• Is flexible and easily shaped when warmed

• Adds to the comfort level of the patient

• Applies in minutes 8

• Helps prevent discomfort and injury caused by prosthetic-to-limb friction and pressure

• Extends life of sleeve and liner

EZ Trim lives up to its name by taking the frustration out of the prosthetic application. EZ Trim is used for prosthetic sockets that do not exceed 1/8" (3.3 cm) in socket wall thickness and each package contains 10' of material.

• Apply at temperatures of 60-80 F to a thoughly clean, dry, wax-free surface

• Heat material lightly to make trim more applicatable to socket edge.

• Cut trimto desired length of socket edge.

• Add glue to trim using narrow tip and slide through trim opening.

• Press trim firmly over socket edge, allowing adhesive to bond.

• APPLICATION TAKES ONLY MINUTES

TRIM APPLICATION

1. Apply at temperatures of 60-80 F to a thoughly clean, dry, wax-free surface

2. Heat material lightly to make trim more applicatable to socket edge.

3. Cut trimto desired length of socket edge.

4. Add glue to trim using narrow tip and slide through trim opening.

5. Press trim firmly over socket edge, allowing adhesive to bond.

6. APPLICATION TAKES ONLY MINUTES